Back in early January this unit was my first entry for the 2026 Analogue Hobbies Painting Challenge. It was a unit purchase from Black Tree Design that has been sitting in my pile of lead for ages. As I wrote I did not find any shields and I placed an order with Warlord Games. Both the shields and decals came in and this is the result. This was first attempt using waterslide decals in decades. I hope to improve with the next group of figures.
I went out for a breakfast today with Graham and Luis. Graham had deliveries for both of us. My package included 3D printed movement trays that I requested for Infamy Infamy Ruleset by Too Fat Lardies. The cavarly and command stands will be useful for other games, such as SAGA or Dragon's Rampant. The recess area of the infantry trays will only match up with a dozen stands of Gauls that I purchased online. These base elements are not to WRG/DBX standards.
 |
| Assorted Movement Trays, Figure for Scale |
All movement trays measure 90mm x 65mm x 3.25mm thick. For the infantry trays, there is a centralised recess of 61mm x 52mm x 2.5mm deep. A smaller, second recessed box of 12mm x 12mm is located in the lower right corner. A die will be used to track casualties since it is not possible to remove figures.
 |
| Sample of Prebased Gauls in Movement Tray |
These trays are for the figures featured in my October 18th 2025 blog entry Gaelic Forces Arrived. The Gauls fit snuggly in the tray. There is no loose movement. My original plan was to use blue Reusable Adhesive Putty to hold the elements in place but I do not think it will be necessary.
I also requested a dozen trays for loose cavalry figures. These trays measure 90mm wide x 65 mm deep x 3mm thick, with slots for three pill ovals of 50mm x 25mm. I also asked for three 60mm square trays to use as command stands. The only requirement was to be able to support two mounted figures. Graham provided me with both the square trays I asked for, and a circular option. The round stand is clearly the winner.
 |
| Cavalry Figures fitted for a Command Stand |
My first entry for the 2026 Analogue Hobbies Painting Challenge are twenty Gallic Warriors. This is a unit purchase from Black Tree Design that has been sitting in my pile of lead for somehere between 15 and 20 years. The unit deals, and even the Gauls are no longer available on the BTD website.
 |
| 20 x 28mm BTD Gaul - Warriors |
These are an easy additional to my SAGA Gallic Warband but are displayed here on prototype movement trays for a concept test for Infamy Infamy. Graham, a fellow gamer here in Montreal created these 3D prints for use with Sharpe's Practice.
On New Year's Eve I discovered I had no shields for these figures, which I imagine are lost in the mists of time. I placed an order to Warlord Games for shields that I hope will work with these figures. I ordered a unit of 16 Javelinmen at the same time.
