I went out for a breakfast today with Graham and Luis. Grahm had deliveries for both of us. My package included 3D printed movement trays that I requested for Infamy Infamy Ruleset by Too Fat Lardies. The cavarly and command stands will be useful for other games, such as SAGA or Dragon's Rampant. The recess area of the infantry trays will only match up with a dozen stands of Gauls that I purchased online. These base elements are not to WRG/DBX standards.
 |
| Assorted Movement Trays, Figure for Scale |
All movement trays measure 90mm x 65mm x 3.25mm thick. For the infantry trays, there is a centralised recess of 61mm x 52mm x 2.5mm deep. A smaller, second recessed box of 12mm x 12mm is located in the lower right corner. A die will be used to track casualties since it is not possible to remove figures.
 |
| Sample of Prebased Gauls in Movement Tray |
These trays are for the figures featured in my October 18th 2025 blog entry Gaelic Forces Arrived. The Gauls fit snuggly in the tray. There is no loose movement. My original plan was to use blue Reusable Adhesive Putty to hold the elements in place but I do not think it will be necessary.
I also requested a dozen trays for loose cavalry figures. These trays measure 90mm wide x 65 mm deep x 3mm thick, with slots for three pill ovals of 50mm x 25mmI alos asked for two 60mm square trays to use as command stands. The requirement is to support two mounted figures. Graham provided me with both the square trays I asked for, and a circular option. The round stand is clearly the winner.
 |
| Cavalry Figures fitted for a Command Stand |
No comments:
Post a Comment